| Author | Title | DOI | Pages | PDF |
| Adamski, M. | Use of Construction Materials in Unmanned Aerial Vehicles | 10.5604/12314005.1216395 | 11-18 | Full text |
| Ambrosiewicz-Walacik, M.; ... | The Effect of the Ultrasounds Treatment on Frying Oils Intended for Biodiesel Production | 10.5604/12314005.1216396 | 19-24 | Full text |
| Batko, W.; ... | Proposal for Air Pollution Monitoring System with Particular Attention to Linear Emissions | 10.5604/12314005.1216398 | 25-32 | Full text |
| Behari, N.; ... | Vibration Transmissibility Behaviour of High Order Biodynamic Models used in Vehicle Seat Design | 10.5604/12314005.1216399 | 33-40 | Full text |
| Boguszewicz, P.; ... | Aviation Piston Engines – Flight Parameter Analysis | 10.5604/12314005.1216400 | 41-48 | Full text |
| Boguszewicz, P.; ... | Wear of Non-Metal Slides under Very High Load | 10.5604/12314005.1216401 | 49-56 | Full text |
| Borowczyk, H.; ... | A Framework for the Reliability Characteristics Estimation on the Experimental Data | 10.5604/12314005.1216402 | 57-64 | Full text |
| Czaban, A. | CFD Analysis of the Impact of a Cone Opening Angle Parameter on the Hydrodynamic Lubrication of the Conical Slide Bearing | 10.5604/12314005.1216435 | 71-78 | Full text |
| Czechowski, M.; ... | Analysis of the Applicability of High Strength Steel of YS = 1300 Mpa in the Marine Industry | 10.5604/12314005.1216436 | 79-84 | Full text |
| Ćwiklak, J.; ... | Numerical Analysis of Bird Strike Events with the Helicopter Windshield | 10.5604/12314005.1216437 | 85-92 | Full text |
| Drabik, D.; ... | Effective Compression Ratio of Combustion Engine as a Way of Increasing Efficiency | 10.5604/12314005.1216438 | 93-100 | Full text |
| Dudzik, K. | Influence of Friction Stir Welding on Hardness Distribution in Joints of AW-5083 Alloy | 10.5604/12314005.1216441 | 101-106 | Full text |
| Dudziński, P.; ... | The Influence of Dynamic Soil Parameters on Tractive Performance of Off-Road Undercarriages | 10.5604/12314005.1216449 | 115-120 | Full text |
| Dyryl, C.T. | Analysis of the Burnishing Process Testing by The Methods – BRP | 10.5604/12314005.1216453 | 121-126 | Full text |
| Frycz, M. | The Ferro-Oils Viscosity Depended Simultaneously on the Temperature and Magnetic Oil Particles Concentration η = η(T,ϕ) – Part II | 10.5604/12314005.1216458 | 127-134 | Full text |
| Galiński, C.; ... | Propulsion Configuration Effect on Performance of an Inverted Joined Wing Airplane | 10.5604/12314005.1216461 | 135-142 | Full text |
| Giernalczyk, M.; ... | Analysis Concerning Possibilities of Adjustability of Cruise Ferries and RO-RO Vessels Operating on the Baltic Sea to the Marpol Convention | 10.5604/12314005.1216463 | 143-150 | Full text |
| Golak, K.; ... | Researches of the Dynamic Characteristics of the Turbine Jet Engine in Flight Based on Its Ground Tests | 10.5604/12314005.1216468 | 151-156 | Full text |
| Grab-Rogaliński, K.; ... | The Possibility of Use a Waste Product of Biofuels Production-Glycerol as a Fuel to the Compression Ignition Engine | 10.5604/12314005.1216471 | 157-164 | Full text |
| Grygorcewicz, P. | Designing Process of Landing Gear in 3D Cad Program | 10.5604/12314005.1216474 | 165-170 | Full text |
| Gruźlińska, E.; ... | Test of the Suitability of Chosen Materials in Terms of Their use for Removing Oil Spillage from the Water Environment | 10.5604/12314005.1216476 | 171-176 | Full text |
| Herdzik, J. | Utilization of Anti-Heeling Systems on Vessels and Chosen Malfunctions During their Exploitation | 10.5604/12314005.1216439 | 177-184 | Full text |
| Hryciów, Z.; ... | Assessment of the Possibility of Carrying People Inside Military Field Workshops | 10.5604/12314005.1216443 | 185-192 | Full text |
| Hyla, P. | Multi Camera Triggering and Synchronization Issue – Case Study | 10.5604/12314005.1216446 | 193-200 | Full text |
| Izdebski, M.; ... | The Application of Genetic Algorithm for Warehouse Location in Logistic Network | 10.5604/12314005.1216464 | 201-208 | Full text |
| Jacyna-Gołda, I. | Modelling The Supply Chain for the Company and Indicators for Assessing the Efficiency of its Functioning | 10.5604/12314005.1216472 | 209-216 | Full text |
| Jakubowski, R.; ... | A Finite Element Model Development as a Part of Process of Energy Absorption Material Selection | 10.5604/12314005.1216478 | 217-224 | Full text |
| Jankowski, A. | Microemulsion as a Means of NOx Reduction in Exhaust Emission of Diesel Engines | 10.5604/12314005.1216479 | 225-232 | Full text |
| Jemielniak, M.; ... | Complex Management System of the Aviation Training Process | 10.5604/12314005.1216481 | 233-240 | Full text |
| Jurczak, W.; ... | Investigation of the Side Wind Effects on the Passenger Ferry in Rolling Motion Conditions | 10.5604/12314005.1216486 | 241-248 | Full text |
| Kapuściński, J.; ... | Simulation of a Portable Container Hybrid Energy Source | 10.5604/12314005.1216488 | 249-256 | Full text |
| Kordowski, P.; ... | High Reliability Flash File System Used into Data Unit of Flight Data Recorder | 10.5604/12314005.1216490 | 257-262 | Full text |
| Kosztyła, T.; ... | An Application of the Heat Accumulator and Improvement of the DC-DC Converter for Hybrid-Electric Vehicles | 10.5604/12314005.1216492 | 263-270 | Full text |
| Kowaleczko, G.; ... | Estimation of the Accuracy of Laser Guided Bomb | 10.5604/12314005.1216495 | 271-280 | Full text |
| Methods for Controlling or Limiting the Development of Microorganisms in Petroleum Products | 10.5604/12314005.1216497 | 281-288 | Full text |
| Krata, P.; ... | Prediction of the Natural Frequency of Ship’s Roll with Regard to Various Models of Roll Damping | 10.5604/12314005.1216499 | 289-296 | Full text |
| Kucybała, P.; ... | The Use of Digital Hydraulic to the Position Control of Hydraulic Cylinder | 10.5604/12314005.1216524 | 297-302 | Full text |
| Kuznetsova, T.; ... | Nanoindentation and Atomic Force Microscopy of thin Surface Layers Formed on the Shaft Surface After Burnishing Process | 10.5604/12314005.1216532 | 303-310 | Full text |
| Łutowicz, M. | Asymmetry Increase in the Course of Compression Pressure as a Measure of Obstruction in Indicating Channel | 10.5604/12314005.1216537 | 311-316 | Full text |
| Markowska, K. | Research on Quality of Cooperation in Outsourcing Services of Railway Undertaking | 10.5604/12314005.1216544 | 317-320 | Full text |
| Mięsikowska, M.; ... | Analysis of Signal of X4 Unmanned Aerial Vehicle | 10.5604/12314005.1216570 | 321-326 | Full text |
| Miszczak, A. | Analysis of the Load Carrying Capacities and the Friction Force in the Gap of the Slide Journal Bearing Lubricated with a Non-Newtonian Oil Described by a Power - Law Model | 10.5604/12314005.1216575 | 327-336 | Full text |
| Molenda, J. | Surface Quality Control of Al2o3 Specimens After Lapping | 10.5604/12314005.1216577 | 337-344 | Full text |
| Molenda, J.; ... | Using Thermovision for Machining Processes Inspection | 10.5604/12314005.1216580 | 345-350 | Full text |
| Muślewski, Ł.; ... | Analysis of Operation Efficiency of Selected Transport Systems | 10.5604/12314005.1216585 | 351-358 | Full text |
| Nanowski, D. | The Influence of Incondensible Gases on the Refrigeration Capacity of the Reliquefaction Plant During Ethylene Carriage by Sea | 10.5604/12314005.1216588 | 359-364 | Full text |
| Nguyen, H. | An Application of Intuitionistic Fuzzy Analytic Hierarchy Process in Ship System Risk Estimation | 10.5604/12314005.1216593 | 365-372 | Full text |
| Nosek, M.; ... | Simulation of a Thermoelectric Generator with Radioisotope Heat Source as a Long-Lived Energy Source | 10.5604/12314005.1216596 | 373-380 | Full text |
| Osipowicz, T.; ... | Analysis of Research Possibilities of Fuel Unit Injectors | 10.5604/12314005.1216597 | 381-388 | Full text |
| Panowicz, R; Kucewicz, M. | Numerical Analysis of Temperature Influence on Deformation and Effort of Bimetallic Element | 10.5604/12314005.1216385 | 389-394 | Full text |
| Polanowski, S.; ... | Experimental Study on the Influence of Burnish Parameters on the Surface Roughness Reduction Index | 10.5604/12314005.1216386 | 395-402 | Full text |
| Prajwowski, K. | Diagnostics of Modern Diesel Engines on the Example of Fiat 1.3 JTD Multijet Engine | 10.5604/12314005.1216387 | 403-410 | Full text |
| Racewicz, S.; ... | Feasibility Study of the Electric Power Generation Unit Start-Up using the Three-Phase Synchronous Generator with the AC Exciter | 10.5604/12314005.1216388 | 411-418 | Full text |
| Rychter, M.; ... | The Correctness Function of Intelligent Device Recording in Aspect used and Their Safety | 10.5604/12314005.1216389 | 419-426 | Full text |
| Rychter, M.; ... | Static Weighing of Vehicles – the Crux of the Pressures on the Axles and Road Safety | 10.5604/12314005.1216390 | 427-434 | Full text |
| Siergiejczyk, M.; ... | Chosen Issues of the Power Supply Selection for Electronic Safety Systems used in Transport | 10.5604/12314005.1216391 | 435-442 | Full text |
| Sitnik, L.; ... | NVH Application Research Using Accelerometers on a Chassis Dynamometer | 10.5604/12314005.1216392 | 443-448 | Full text |
| Skalski, P. | Application of a Magnetorheological Elastomer in an Aviation Structure | 10.5604/12314005.1216393 | 449-456 | Full text |
| Skrętowicz, M.; ... | Risk Evaluation of Driver Exposure to Exhaust Fumes inside the Passenger Car Cabin in Urban Traffic Conditions | 10.5604/12314005.1216394 | 457-464 | Full text |
| Sławiński, G.; ... | Numerical Study on the Modification Effect of the Seat Load Acting on a Soldier During the Blast Wave Derived from IED Explosion | 10.5604/12314005.1216397 | 465-472 | Full text |
| Sławiński, G.; ... | Experimental and Numerical Investigation of Connector with Elastomer Joint | 10.5604/12314005.1216440 | 473-480 | Full text |
| Sławiński, G.; ... | Explosive Charge Impact on the Openwork Steel Shield | 10.5604/12314005.1216442 | 481-488 | Full text |
| Smolarek, L. | Examples of Bow-Tie Risk Analysis at Maritime Transport | 10.5604/12314005.1216455 | 489-494 | Full text |
| Stańczyk, P.; ... | Selected Issues Rules of Weight Control Aircraft | 10.5604/12314005.1216466 | 495-504 | Full text |
| Stępkowski, M.; ... | Spin Test Rig – Most Important Stage of Tunnel Thruster’s Overhaul | 10.5604/12314005.1216475 | 505-510 | Full text |
| Surmacz, K. | Experimental and Computational Studies of Stall on a Helicopter Rotor Airfoil | 10.5604/12314005.1216477 | 511-518 | Full text |
| Szafran, K.; ... | Selection of Propulsion Unit for a New Class of Transport Hovercraft as a Compromise Between Technical Performance and Purchase and Exploitation Costs | 10.5604/12314005.1216480 | 519-524 | Full text |
| Szelmanowski, A.; ... | Research Method of Dynamic Capability of an Actuating Block of the SSP-FK Aircraft Fire Suppression System in False Alarm Aspect | 10.5604/12314005.1216482 | 525-532 | Full text |
| Śpiewak, S. | A Peculiarity of Determining a Static Carrying Capacity for the One-Row Ball Slewing Bearing Loaded the Large Radial Force | 10.5604/12314005.1216485 | 533-540 | Full text |
| Tywoniuk, A.; ... | A Peculiarity of Determining a Static Carrying A Design and Numerical Optimization of a Landing Gear for 1400 Kg (At-6) Take-Off Mass Aircraft | 10.5604/12314005.1216489 | 541-548 | Full text |
| Wierzbicki, S.; ... | Experimental Tests on a Dual Fuel Compression-Ignition Engine Powered by Biogas with a Varying Chemical Composition | 10.5604/12314005.1216491 | 549-554 | Full text |
| Wierzcholski, K.; ... | The Robot Joint Lubrication with Ultra-Thin Hyperelastic Superficial Layers | 10.5604/12314005.1216493 | 555-562 | Full text |
| Wiśniowski, W.; ... | Results of the Modernization for Highly Manoeuvrable Training Jet Aircraft | 10.5604/12314005.1216617 | 563-570 | Full text |
| Witek, L.; ... | Impact of the Vibration Amplitude on the Fatigue Life of Compressor Blades with Mechanical Defects | 10.5604/12314005.1216501 | 571-576 | Full text |
| Wojtas, M.; ... | Experimental Method of Magnetic Permeability Evaluation of Magnetorheological Composites | 10.5604/12314005.1216506 | 577-584 | Full text |
| Żurek, J.; ... | Dilatometric Researches of Novel Alloy for Combustion Engine Pistons | 10.5604/12314005.1216513 | 585-596 | Full text |
